http://www.murata.com/ data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject t o change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before ordering. 1 o this data sheet is applied for rc combined chip emifil r used for general electronics equipment for your design. 2009.5.1 noise suppression products/emi suppression filters > emifil r (rc combined) > array 1.1 0.5 1.6 0.2 3.2 0.2 0.8 0.2 0.8 0.1 0.05 min. 0.05 min. 0.4 0.15 (top view) (bottom view) (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (in mm) : electrode (2)gnd (3) (4) (5) (6) (7) (8) (9) (10) output input no polarity. (1)gnd frequency (mhz) insertion loss (db) (50 ? - 50 ? ) 1 10 100 1000 0 10 20 30 40 50 2000 nfa31gd1006r84 nfa31gd1016r84 nfa31gd4706r84 frequency (mhz) insertion loss (db) (50 ? - 50 ? ) 1 10 100 1000 0 10 20 30 40 50 2000 nfa31gd1004704 nfa31gd4704704 nfa31gd1014704 frequency (mhz) insertion loss (db) (50 ? - 50 ? ) 1 10 100 1000 0 10 20 30 40 50 2000 nfa31gd1001014 nfa31gd4701014 nfa31gd1011014 frequency (mhz) insertion loss (db) (50 ? - 50 ? ) 1 10 100 1000 0 10 20 30 40 50 2000 nfa31gd4703304 emifil r (rc combined) array nfa31g series (1206 size) dimensions equivalent circuit insertion loss characteristics (main items) insertion loss characteristics (main items) insertion loss characteristics (main items) insertion loss characteristics (main items) continued on the following page.
continued from the preceding page. http://www.murata.com/ data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject t o change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before ordering. 2 o this data sheet is applied for rc combined chip emifil r used for general electronics equipment for your design. 2009.5.1 noise suppression products/emi suppression filters > emifil r (rc combined) > array packaging code packaging minimum quantity d 180mm paper tape 4000 b bulk(bag) 100 rated value ( p : packaging code) part number capacitance resistance rated current rated voltage insulation resistance (min.) operating temperature range nfa31gd1006r84 p 10pf+20%-20% 6.8ohm+40%-40% 50ma 6vdc 1000m ohm -40 c to +85 c nfa31gd1004704 p 10pf+20%-20% 47ohm+30%-30% 20ma 6vdc 1000m ohm -40 c to +85 c nfa31gd1001014 p 10pf+20%-20% 100ohm+30%-30% 15ma 6vdc 1000m ohm -40 c to +85 c nfa31gd4706r84 p 47pf+20%-20% 6.8ohm+40%-40% 50ma 6vdc 1000m ohm -40 c to +85 c nfa31gd4703304 p 47pf+20%-20% 33ohm+30%-30% 20ma 6vdc 1000m ohm -40 c to +85 c nfa31gd4704704 p 47pf+20%-20% 47ohm+30%-30% 20ma 6vdc 1000m ohm -40 c to +85 c nfa31gd4701014 p 47pf+20%-20% 100ohm+30%-30% 15ma 6vdc 1000m ohm -40 c to +85 c nfa31gd1016r84 p 100pf+20%-20% 6.8ohm+40%-40% 50ma 6vdc 1000m ohm -40 c to +85 c nfa31gd1014704 p 100pf+20%-20% 47ohm+30%-30% 20ma 6vdc 1000m ohm -40 c to +85 c nfa31gd1011014 p 100pf+20%-20% 100ohm+30%-30% 15ma 6vdc 1000m ohm -40 c to +85 c number of circuit: 4 ! caution (rating) do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the tin melting point is used. please confirm the solderability of tin plating termination chip before use. ! caution/notice
|
